Main application of gas-assisted molding technology


图片1.png


Gas-assisted molding has a particularly obvious effect on the material saving of tubular and rod-shaped plastic parts, such as car handles, seat armrests, window frames, and wood-like furniture, the material saving rate of this kind of parts can be reached in 20%-40%. For large flat parts, such as door panels, refrigerator trays, automotive interior and exterior parts, gas-assisted reinforcing ribs can be used to eliminate the warping deformation of the flat parts due to residual stress and improve the strength of the parts. Home appliances are the largest application field of gas-assisted technology., for large-screen color TVs and TV brackets over 64cm, more than 90% of them use gas-assisted molding technology, with the increasing market demand for large-screen color TVs and cars, and the popularization of home computers, gas-assisted molding technology will obtain immeasurable economic benefits in the application of household appliances. From the perspective of the trend of replacing steel with plastic, the automobile, furniture, construction, and instrumentation industries will also compete to use gas-assisted molding technology in order to save materials, improve product quality, and participate in the competition in the international market. The promotion and application of gas-assisted molding technology has pushed the plastics processing industry to a new stage of development.

Tags: Injection Mold | Injection Mold Supplier | Injection Mold Factory | Mold Factory | Mold Supplier | Injection Molding |
Related News about USM Injection Mold
  • Comparison of water-assisted and gas-assisted injection molding

    Comparison of water-assisted and gas-assisted injection molding

    May 19, 2022Comparing with water-assisted injection molding technology and gas-assisted injection molding technology, the fundamental difference is the nature of the auxiliary molding media used. One is liquid...view
  • What is Ejection Molding?

    What is Ejection Molding?

    Dec 28, 2021The process to get injection molded products is called injection molding, or called injection. Injection molding is an important method in polymer molding processing, it is characterized by a short...view
  • Key points of gas-assisted injection molding process

    Key points of gas-assisted injection molding process

    Apr 20, 2022Gas injection parameters The gas-assisted control part is a device that controls the gas pressure in each stage, the gas-assisted parameters have only two values: gas injection time (seconds) and gas...view
  • The main design points of the design of the plastic mold pouring system

    The main design points of the design of the plastic mold pouring system

    Jan 11, 2022The main runner is the part where the molten plastic first passes when it is sprayed from the injection nozzle, and it is coaxial with the injection nozzle, because of repeated contact and collision...view
  • Parting surface venting of runner system

    Parting surface venting of runner system

    Mar 10, 2022There are a large amount of gas in the main and sub channel, these gas are discharged through the pull rod (push rod) during injection processing, a part of gas come out from exhaust slot on parting...view
  • Design Tips of Vacuum Venting Mold

    Design Tips of Vacuum Venting Mold

    Mar 30, 2022There are some regular venting way which are parting surface venting, insert venting, insert pin venting and well-ventilated steel, but there is a special way is vacumm venting, it will need vacumm...view